HOW TO USE
s
Operating the Air Purifier
1. Place the appliance upright on a horizontal, stable, dry and heat-resistant
surface. DO NOT place the appliance on a soft surface such as a mattress,
pillow, cushion or sofa, as this could cause the appliance to tip over, blocking the
Air Inlet & Air Outlet.
2. Insert one end of the power cable into the socket at the back of the Main Body
and the plug of the power cable directly into the wall socket and switch ON.
Ensure that the plug fits tightly into the socket.
3. Touch the Power button to switch the appliance ON.
4. During operation, the Ambient LED Light and Negative Ion Generator are turned
on by default. The appliance works as an air purifier by releasing negative ions
into the surroundings.
5. To turn off (or on again) the Ambient LED Light, press and hold the Timer button
for 3 seconds.
6. (optional) Touch the Wind Speed button for the Fan speed you desire (Low – 1,
Mid – 2, High – 3).
7. (optional) To turn on (or off) the Mosquito Catching Function, press and hold the
Timer + Wind Speed buttons together for 3 seconds.
8. (optional) You can select the desired time for the appliance to operate for 2
hours, 4 hours or 6 hours if you wish. Press the Timer button once for 2 hours,
twice for 4 hours and 3 times for 6 hours.
9. Touch the Power button to switch OFF (or switch ON again) the appliance.
10. Unplug the power cable from the wall socket when not in use and before
cleaning or replacing the Filter, or cleaning the appliance.
