© iFeel Tactile Systems, 2018
7
1.6
Initial Operation
•
Connect the external 230V power supply with the 12V DC interface (3). and push the
“on” button (4). The green/red LED (1)
flashes now alternatively and the blue LED (2)
flashes continuously. This means that the system is operational and still not connected
with any audio source.
•
Connect your headphones with the 3,5 mm headphone interface (6).
•
The SenseForce Pad Extreme can be connected with your sound source either analogue
via a 3.5mm audio jack cable (5) or wireless via Bluetooth.
Bluetooth Connection
Activate on your Bluetooth capable media device (Smart-Phone/ Tablet/ PC etc) the
Bluetooth-search funct
ion. Connect with the found device „iFeel MiniAmp“. As soon as
both devices are connected the blue LED (2) flashes continuously and the green LED
(1) flashes periodically. From now on SenseForce Bluetooth connects automatically with
the latest connected media device. This happens as soon as the media device is ready
to receive Bluetooth and the MiniAmp is switched on.
Analogue Connection
Connect SenceForce with your media device via the enclosed 3,5mm jack cable (4). Now
the green LED (1) flashes continuously, the LED (2) flashes green. This means that an
audio cable is inserted and the MiniAmp works in Line-In Mode.
If you insert a 3.5mm Audio cable during Bluetooth operation the MiniAmp switches
automatically to the Line-In mode and Bluetooth is being interrupted. If you pull out
the Line-In cable the device works in Bluetooth mode again.
Note: if the SenseForce Pad Extreme is longer than 20 min without operation, it automatically
switches off. In this case the “on“ button (4) needs to be pushe
d again.
