6
3 Operating and display elements
����
�
�
�
Slide switch R/P
1:
Addressing plug
2:
Combicon connector with screw terminals (option)
3:
4 Installation
Install the safe AS-i output module on a 35 mm raised rail� The protection rating
of the unit is IP 20, therefore it should be mounted in a protected location (e�g�
control cabinet)�
The mounting orientation has no adverse effect on the function� Ensure that there
is sufficient air circulation in the control cabinet�
5 Electrical connection
Mechanical switches or inductive sensors, for example, can be connected to the
inputs� Connect the non-safe inputs e�g� with the screw terminals of the Combicon
connectors�
Attention!
Do not connect the non-safe inputs to an external potential!
