5
DE
Bei Fehlfunktion des Gerätes oder bei Unklarheiten bitte mit dem Hersteller in
Verbindung setzen. Eingriffe in das Gerät können schwerwiegende Beeinträchti-
gungen der Sicherheit von Menschen und Anlagen zur Folge haben. Sie sind nicht
zulässig und führen zu Haftungs- und Gewährleistungsauschluss.
Funkanlagen
2.2
Funkgeräte dürfen generell nicht in der Nähe von Tankstellen, Kraftstoffdepots,
Chemiewerken oder Sprengarbeiten benutzt werden.
Keine entflammbaren Gase, Flüssigkeiten oder explosive Stoffe im Bereich des
►
Gerätes transportieren und lagern.
Störung elektronischer und medizinischer Geräte
2.3
Der Betrieb kann die Funktionsfähigkeit von nicht ordnungsgemäß geschirmten
elektronischen Geräten beeinträchtigen.
Das Gerät in der Nähe medizinischer Geräte ausschalten.
►
Bei Störungen ggf. beim Hersteller des jeweiligen Gerätes informieren.
►
Bestimmungsgemäße Verwendung
3
Das RF-Identifikationssystem DTS125 dient zum berührungslosen Lesen und/
oder Beschreiben systemkonformer RFID-Transponder (ID-TAGs).
Die Daten werden in digital codierte Werte gewandelt und der AS-i Steuerungse-
bene zur Verfügung gestellt (AS-i Master, Controller oder Host).
Einsatzbereiche sind z.B.:
Materialflusssteuerung und -kontrolle in Fertigungslinien
●
Lagermanagement durch automatische Lagerguterkennung
●
Behältermanagement, Kommissionierung oder die Warenverfolgung
●
Funktion
4
Funktionsweise
4.1
Die ID-TAGs werden passiv betrieben, d.h. ohne Batterie. Die zum Betrieb not-
wendige Energie wird vom Lese-/Schreibkopf aufgebracht.
Das physikalische Prinzip der Energieübertragung beruht auf der induktiven
Kopplung. Die integrierte Antennenspule des Lese-/Schreibkopfes erzeugt ein ma-
gnetisches Feld, das zu einem Teil die Antennenspule des ID-TAGs durchdringt.
Durch Induktion wird dort eine Spannung erzeugt die den Datenträger mit Energie
versorgt.