11
UK
8.2 Connection to an MQTT broker
The device is an MQTT client and always requires an MQTT broker.
► The device publishes under the MQTT topic "ifm/VWV/{SID}", with {SID} being
a placeholder for the sensor’s serial number.
By subscribing to the topic "ifm/VWV/#" all sensors are displayed.
9 Maintenance, repair and disposal
The operation of the device is maintenance-free. It is not possible to repair the
device. Dispose of the device in an environmentally friendly way in accordance
with the applicable national regulations when it is no longer used.
10 Radio approvals
If approvals are granted, the approval texts of the respective countries shall apply.
10.1 Overview
The overview of the approval status of a device is available on our website at
www.ifm.com.
10.2 Europe / EU declaration of conformity
ifm electronic gmbh hereby declares that the device corresponds to the directive
2014/53/EU.
You can find the EU declaration of conformity at the following Internet address:
www.ifm.com.
10.3 USA
FCC note:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device must not cause harmful interference, and
2. this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications made to this device not expressly approved by ifm may
void the FCC authorisation to operate this device.
