AS-i Gateway with Profinet device interface
23
>
List
41484
A list provides a set of defined values. The operator can select precisely one value from this set (= 1 of
n selection).
Examples:
= list without caption
= list with caption
Use:
1 Select a list
►
Use [
] / [
] arrow key to select the list.
>
The focus (orange frame) moves to the selected list.
>
The list shows the active value: (in this example
Gateway
).
2 Activate the list
►
Use [Select] function key to open the list.
>
The opened list shows the selectable values.
3 Select a value
►
Use [
] / [
] arrow key to select the desired value from the list.
>
The background colour of the selected value turns orange.
4 Apply the selected value
►
Use [Select] function key to apply the selected value.
OR:
Use [Back] function key to quit and close the list.
>
The list shows the selected value.
The set value will not always become effective immediately. Often the change must be
confirmed by clicking a button (e.g. [Accept selection])!
