AS-i Gateway with Profinet device interface
98
3 Set the system time
Option 1: Set the system time manually
►
[Uhrzeit] and [Datum] indicate the current system time.
►
Deactivate the checkbox [NT aktivieren].
>
Status LED =
►
In the group [Uhrzeit], set the desired clock time one position at a
time.
►
In the group [Datum], set the desired date one position at a time.
►
Save the changes with [Finish] and go to the standard start
screen.
Option 2. Synchronise the system time with an NTP server
►
Activate the checkbox [NTP aktivieren].
>
Status LED =
►
Enter the IP address of the NTP server in the IP address field.
►
Pick the time zone of the NTP server from the list (UTC format).
>
The NTP client of the device synchronises the system time with
the selected NTP server.
►
Wait until status LED =
>
[Datum] and [Uhrzeit] show the synchronised values.
►
Save the changes with [Finish] and go to the standard start
screen.
