AS-i Gateway with Profinet device interface
144
>
Configuration of the analogue channels in the slots 5 ... 6
41605
The configuration of the device parameters [analogue channels per input slave] und [analogue
channels per output slave] determines which analogue channels of the AS-i slaves are transferred.
The following table shows the relevance of the parameter values that can be set:
Parameter value
Description
1 channel
Fixed slave assignment
The first channel of the slave addresses 1 to 30 of AS-i Master 1 and AS-i Master 2 is transmitted.
The assignment of the slaves is fixed (
→
Table: Fixed slave assignment for slots 5...6
(
)). A
configuration of the slave order in the device-specific parameters is ineffective.
2 channels
Fixed slave assignment
Channels 1 and 2 of the slave addresses 1 to 31 of AS-i Master 1 and AS-i Master 2 are transmitted.
The assignment of the slaves is fixed (
→
Table: Fixed slave assignment for slots 5...6
(
)). A
configuration of the slave order in the device-specific parameters is ineffective.
4 channels
Variable slave assignment
From up to 31 slaves of AS-i Master 1 and/or AS-i Master 2 4 channels each (with 16 bits each) are
transferred with analogue data (
→
Table: Variable slave assignment for slots 5...6
(
→ S.
Selection of the slaves to be transmitted via the following device parameters:
- input data:
x. Analogue input slave
- output data:
x. Analogue output slave
