17
ifm
Programming Manual AS-i Gateway AC14 (4.2.x)
12/2017
Getting started
Create CODESYS project
>
5.1.1
Create new project with AS-i Gateway AC14
17682
To avoid errors during manual system configuration, it is explicitly recommended to use the
project template from ifm electronic when creating the AS-i Gateway AC14 project in
CODESYS.
Qualifications
>
All required software components are correctly installed (→
Installation
>
CODESYS successfully started.
1 Create a new project
►
Select [File] > [New Project...].
>
The window to enter the project properties appears:
►
Set the following values:
1. [Templates]: Select [ifm_SmartPLC_StandardLine Projekt].
2. [Name]: Enter project name
3. [Location]: Select the storage location of the project file.
►
Click on [OK] to verify the entered values.
>
CODESYS creates a new project with AS-i Gateway AC14.
>
The window [Devices] shows the device tree of the project (→
Overview: Project structure with AS-i Gateway
AC14