27
ifm
Device Manual IO-Link Master with Modbus interface CabinetLine 8 Ports IP 20 (AL1940)
05 / 2018
Configuration
LR DEVICE
>
8.1.4
IoT: Configure the interface to the LR SMARTOBSERVER
16552
To enable data transfer between the device and the LR SMARTOBSERVER monitoring software, the
LR SMARTOBSERVER monitoring software interface has to be configured.
►
Select [IoT] menu.
>
The menu page shows the current settings.
►
Set the following parameters as required:
Name
Description
Possible values
[IP address
LR SMARTOBSERVER]
IP address of the PC on which the
LR SMARTOBSERVER is installed.
Factory setting: 255.255.255.255
[Port
LR SMARTOBSERVER]
Port number that is used to send process data to
the LR SMARTOBSERVER
0
...
65535
Factory setting:: 35100
[Interval
LR SMARTOBSERVER]
Cycle time for the transfer of the process data to
the LR SMARTOBSERVER (value in milliseconds)
[Off]
no transfer
500
...
2147483647
500 ms
...
2147483647 ms
[Application Tag]
Source identifier of the IO-Link master in the
structure of the LR SMARTOBSERVER (String32)
Factory setting: AL1940
After changing the parameter [Port LR SMARTOBSERVER] or [Application Tag], it may take
120 seconds before the device establishes a new TCP connection.
To prevent the delay:
► Reboot the device after the parameter change.
►
Save changed values on the device.
