ANT515 ANT516
10
5.6 Installation of the device without mounting adapter
Fig. 5: Install the device using screws
u
Attach the device at the mounting location with suitable screws or glue.
5.7 Mounting distances
Operating mode
Distance side (A)
Distance front (B)
For reading and writing
≥ 160 mm
≥ 170 mm
5.8 Positioning of the ID tags
The sensing face marks the centre of the integrated antenna coil of the read/write head.
u
Align the sensing face of the read/write head and the ID tag in the same way.
For installation in or on metal use the ID tags provided for this purpose.
Position the ID tag in the area of the sensing face. When doing so, the angle of aperture and the
operating distance must be adhered to (→ Data sheet of the device).
