CR3132
CANwireless
8
6 Electrical connection
6.1 Connectors
1
1: Micro Timer II connector, 14-pin
(CAN, supply, inputs, outputs)
6.1.1 Operating voltage, CAN interface, inputs and outputs
1
2
13
14
Fig. 2: Micro Timer II connector, 14-pin
1:
VCC / terminal 30 (supply)
2:
factory setting 1 (input)
3:
GND / terminal 31 (supply)
4:
analogue input 1
5:
analogue input 2
6:
not used
7:
digital output
8:
digital input / terminal 15 (input, ignition signal)
9:
factory setting 2 (input)
10:
GND / terminal 31 (supply)
11:
CAN2_H (CAN interface 1 (high) bidirectional)
12:
CAN2_L (CAN interface 1 (low) bidirectional)
13:
CAN1_H (CAN interface 1 (high) bidirectional)
14:
CAN1_L (CAN interface 1 (low) bidirectional)
