CANwireless
CR3132
9
7 Light indicators
2
1
1:
ON LED
2:
STATUS LED
7.1 ON LED
Colour
State
Meaning
-
Off
The device is switched off or in sleep mode.
Green
Flashing slowly
The device is in update mode and ready to receive a
firmware update.
The ON and STATUS LEDs flash simultaneously.
Green
Flashing quickly
Firmware is being installed.
The ON and STATUS LEDs flash simultaneously.
Green
On
The device is switched on.
Terminal 30 voltage is in the permissible range.
Red
On
The device is switched on.
Terminal 30 voltage is outside the permissible range.
Orange
On
The device is reset to factory settings.
The ON and STATUS LEDs are lit simultaneously.
Turquoise
On
The radio module is being updated (via HTTP server).
The ON and STATUS LEDs are lit simultaneously.
Magenta
On
Active connection with CANwireless configurator
The ON and STATUS LEDs are lit simultaneously.
Tab. 1: ON LED
7.2 STATUS LED
The STATUS LED indicates the operating status of the active connection.
Colour
State
Meaning
-
Off
The device is switched off or in sleep mode.
Green
Flashes (200 ms on, 200 ms off, 200
ms on, 1000 ms off)
The device is initializing.
Green
Flashes (200 ms on, 200 ms off)
The device is ready for connection.
Green
On
The device has established a connection.
The device functions reliably.
