UK
RFID UHF reader
15
7.6 LED
The reader has a 2-colour LED to indicate operating states�
The following table shows the different colours with the corresponding operating
states�
red
green
Operating status
X
Flashes approx� every 8 seconds
Error during initialisation
X
X
Device booting
Flashes approx� every 8 seconds
X
Normal operation
7.7 Audio signalling device
The reader has an audio signalling device for audible signalling of operating
states. The LED flashes in addition to the sound (→
7�6)�
Sound
Operating status
1x short sound
Reader has booted successfully
2x long sound
Reader signals an error
8 Configuration
Correct configuration of the reader and adaptation to the application requires
knowledge about the EPCGlobal Standard of GS1� In this standard, the function
of the interface between tag and reader is described� For more information, please
visit: www�epcglobalinc�org
The configuration manual describes which parameters are available for the
configuration of the reader�
The reader is controlled via the ifm electronic proprietary reader protocol�
The versions of the documents must correspond with the software version
of the reader� The accompanying CD contains the up-to-date documents for
the supplied reader firmware�
9 Maintenance, repair and disposal
The device does not contain any components requiring maintenance�
►
Do not open the device
►
The device must only be repaired by the manufacturer�
►
Dispose of the device in accordance with the national environmental
regulations�
