ifm
Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376)
2012-02-23
Operation
Read states of the safety monitor
443
14.13.1
Case A: no safety device has triggered
5975
Read Monitor
Slave 31
OSSD1: green
OSSD2: green
Config. Mode: active
MORE
142
ESC
Step 7:
> Display of the current data of the safety monitor:
Slave = configured AS-i slave address,
OSSD1 = LED colour* for enable circuit 1,
OSSD2 = LED colour* for enable circuit 2,
Configuration mode active / not active
= operating mode of the safety monitor.
►
Scroll to more data with [MORE].
OR:
Return to screen 141 with [ESC] .
.
*)
red = relay contact interrupted: a safety device has triggered.
yellow = relay contact inter restart disable = ready to start.
green = relay contact closed: safety devices ok.
.
Info
Depending on the type of connected safety devices (one / two channels) the displays of OSSD1 and
OSSD2 may be different.
14.13.2
Case B: a safety device has triggered
5977
Read Monitor
Slave 31
OSSD1: red
OSSD2: red
Config. Mode: active
MORE
142
ESC
Step 7:
> Display of the current data of the safety monitor:
Slave = configured AS-i slave address,
OSSD1 = LED colour* for enable circuit 1
here: enable circuit interrupted,
OSSD 2 = LED colour* for enable circuit 2
here: enable circuit interrupted,
Configuration mode active / not active
= operating mode of the safety monitor
(not active = Run mode).
►
Scroll to more data with [MORE] (only possible in case of a fault).
OR:
Return to screen 141 with [ESC] .
