ifm
Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376)
2012-02-23
Operation
Set output values
469
14.21.1
Set digital output
6006
AS-i 1 Slave 6A
Digital output
Parameter value
OK
151
ESC
Step 8:
►
Select [Digital output] with [OK].
.
Digital output
AS-i 1 Slave 6A
Current: 0000 [ 00h ]
Setup: 0000 [ 00h ]
SET
153
ESC
Step 9:
> Current = digital outputs current value binary / hexadecimal.
> Setup = digital outputs target value binary / hexadecimal.
►
Set the requested target value by pressing [ ] or [ ].
.
Digital output
AS-i 1 Slave 6A
Current: 0000 [ 00h ]
Setup: 0010 [ 02h ]
SET
153
ESC
Step 10:
> Setup = set target value.
►
Transmit the set target value to the outputs of the slaves by pressing
[SET].
.
Digital output
AS-i 1 Slave 6A
Current: 0010 [ 02h ]
Setup: 0010 [ 02h ]
SET
153
ESC
Step 11:
> Value in "Current" adopts value from "Setup".
> Outputs on the slave are switched accordingly.
> Set outputs remain on until a new setup or a new connection to the
Profibus DP master changes the outputs again.
.
