manualshive.com logo in svg

IFM Ecomat 300 AC1375, Device Manual

The IFM Ecomat 300 AC1375 device manual is essential for understanding and operating this equipment effectively. You can easily download the manual for free from our website. Ensure seamless use of your IFM Ecomat 300 AC1375 with the user manual available for download at 88.208.23.73:8080.

Share
Download
background image

ifm

 Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376) 

2012-02-23 

Index  

 

519 

Data distribution of the A slave with profile S-7.A.A in 

 the M4 gateway ................................................................. 82 

Data distribution of the A slave with profile S-B.A.5 in 

 the M4 gateway ................................................................. 84 

Data distribution of the B slave with profile S-0.A.E in 

 the M4 gateway ................................................................. 44 

Data distribution of the B slave with profile S-3.A in 

 the M4 gateway ................................................................. 48 

Data distribution of the B slave with profile S-7.A.5 in 

 the M4 gateway ................................................................. 70 

Data distribution of the B slave with profile S-7.A.7 in 

 the M4 gateway ................................................................. 73 

Data distribution of the B slave with profile S-7.A.8 in 

 the M4 gateway ................................................................. 76 

Data distribution of the B slave with profile S-7.A.9 in 

 the M4 gateway ................................................................. 80 

Data distribution of the B slave with profile S-7.A.A in 

 the M4 gateway ................................................................. 83 

Data distribution of the B slave with profile S-B.A.5 in 

 the M4 gateway ................................................................. 86 

Data distribution of the single slave with profile S-0.1 in 

 the M4 gateway ................................................................. 42 

Data distribution of the single slave with profile S-1.1 in 

 the M4 gateway ................................................................. 45 

Data distribution of the single slave with profile S-3.1 in 

 the M4 gateway ................................................................. 46 

Data distribution of the single slave with profile S-6.0.x in 

 the M4 gateway (analogue mode)..................................... 51 

Data distribution of the single slave with profile S-6.0.x in 

 the M4 gateway (transparent mode).................................. 49 

Data distribution of the single slave with profile S-7.3.4 in 

 the M4 gateway ................................................................. 53 

Data distribution of the single slave with profile S-7.3.5 in 

 the M4 gateway ................................................................. 54 

Data distribution of the single slave with profile S-7.3.6 in 

 the M4 gateway ................................................................. 55 

Data distribution of the single slave with profile S-7.3.C in 

 the M4 gateway ................................................................. 56 

Data distribution of the single slave with profile S-7.3.D in 

 the M4 gateway ................................................................. 57 

Data distribution of the single slave with profile S-7.3.E in 

 the M4 gateway ................................................................. 58 

Data distribution of the single slave with profile S-7.4.0 in 

 the M4 gateway ................................................................. 59 

Data distribution of the single slave with profile S-7.4.4 in 

 the M4 gateway ................................................................. 60 

Data distribution of the single slave with profile S-7.4.5 in 

 the M4 gateway ................................................................. 61 

Data distribution of the single slave with profile S-7.4.6 in 

 the M4 gateway ................................................................. 62 

Data distribution of the single slave with profile S-7.4.C in 

 the M4 gateway ................................................................. 63 

Data distribution of the single slave with profile S-7.4.D in 

 the M4 gateway ................................................................. 64 

Data distribution of the single slave with profile S-7.4.E in 

 the M4 gateway ................................................................. 65 

Data distribution of the single slave with profile S-7.5.5 in 

 the M4 gateway ................................................................. 66 

Data image (AS-i) .................................................................. 509 
Data management................................................................... 16 
Define Profibus DP modules ................................................. 156 
Definition in the GSD file ....................................................... 170 
Description............................................................................. 314 
Description of the extended ID code 1 .................................... 34 
Description of the extended ID code 2 .................................... 34 
Description of the ID code (selection) ..................................... 33 

Description of the IO code for digital slaves............................ 33 
Details of the slave assignment............................................... 26 
Detect an unknown slave address ........................................ 426 
DeviceNet .............................................................................. 509 
Device-specific Profibus DP parameters............................... 169 
Device-specific Profibus DP parameters (example).............. 169 
DHCP..................................................................................... 509 
Diagnosis............................................................................... 509 
Diagnostic LEDs ...................................................................... 92 
Diagnostic master flags (byte 10 / byte 36)........................... 405 
Digital inputs .......................................................................... 402 
Digital inputs / outputs ........................................................... 148 
Digital inputs and outputs of the slaves at start address 0.... 149 
Digital inputs and outputs of the slaves at start address 65.. 151 
Digital outputs........................................................................ 403 
Display (presentation, language, contrast/brightness) ............ 94 
Display list of activated slaves (LAS) .................................... 419 
Display of slave with peripheral fault ..................................... 425 
Display of the list of detected slaves (LDS)........................... 413 
Display of the list of projected slaves (LPS).......................... 416 
Display of the list of slaves with peripheral fault (LPF).......... 422 
Display of the longest cycle time ........................................... 439 
Display slave data ................................................................. 461 
Display system parameters ................................................... 474 
DP module 12 

extended command channel .......................................................207 

DP module 7 – command channel ........................................ 172 
DPV1 addresses in slot 0 for access via PLC....................... 316 
DPV1 error codes 

application....................................................................................319 
application-specific ......................................................................320 
data access..................................................................................319 
device...........................................................................................320 

DPV1 error messages ........................................................... 319 
DPV1 function 58 'Reason codes' ......................................... 320 
DRAM .................................................................................... 509 
Electrical connection................................................................ 88 
EMV....................................................................................... 509 
Enter detected slaves in the configuration list....................... 131 
Error codes in the module 12 ................................................ 209 
Error screen............................................................................. 95 
Ethernet ................................................................................. 509 
Examples............................................................................... 318 
Examples DPV1 reading ....................................................... 318 
Examples DPV1 writing......................................................... 318 
Extended device-specific diagnosis for Profibus DP............. 404 
Extended ID code 2 for analogue slaves with profile 7.3.x ..... 34 
Extended ID code 2 for analogue slaves with profile 7.4.x ..... 35 
FAT errors – error codes F01...F10....................................... 485 
FC 510 
FE – functional earth ............................................................. 510 
Field definitions for direct data access .................................... 18 
Fieldbus ................................................................................. 510 
Finish configuration ............................................................... 128 
Finish set-up .......................................................................... 171 
Firmware................................................................................ 510 
Flash errors – error codes F20...F30..................................... 487 
Flash memory........................................................................ 510 
FMEA..................................................................................... 510 
FRAM..................................................................................... 510 
Function................................................................................... 16 
Further functions for Profibus DPV1...................................... 402 
Gateway ................................................................................ 510 
Gateway transfer time ........................................................... 511 
General.................................................................................. 136 
General data.......................................................................... 477 

Summary of Contents for Ecomat 300 AC1375












































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Ecomat 300 AC1375

Ursalink UG65 Quick Start Manual preview
UG65
Brand: Ursalink Pages: 25
Inteno DG200 Series User Manual preview
DG200 Series
Brand: Inteno Pages: 90
Pahlen EC220 User Manual preview
EC220
Brand: Pahlen Pages: 19
Omnio 6011000 Manual preview
6011000
Brand: Omnio Pages: 19
Voptel Technology VG1X User Configuration Manual preview
VG1X
Brand: Voptel Technology Pages: 67
Telstra DEVG2020 User Manual preview
DEVG2020
Brand: Telstra Pages: 25
3Com OfficeConnect 3CRWE53172 User Manual preview
OfficeConnect 3CRWE53172
Brand: 3Com Pages: 124
3Com OCG VOICE EXPANSION - User Manual preview
OCG VOICE EXPANSION -
Brand: 3Com Pages: 177
IBM TotalStorage NAS Gateway 300 Quick Start Instructions preview
TotalStorage NAS Gateway 300
Brand: IBM Pages: 14
HDL HDL-MCIP-RF.10 User Manual preview
HDL-MCIP-RF.10
Brand: HDL Pages: 25
GlobalSCAPE DMZ Gateway v3.1 User Manual preview
DMZ Gateway v3.1
Brand: GlobalSCAPE Pages: 60
Janus AC-4CM10-650-F-20-000 Installation & Operation Manual preview
AC-4CM10-650-F-20-000
Brand: Janus Pages: 8
Altice Labs GR240BG User Manual preview
GR240BG
Brand: Altice Labs Pages: 56
i-tec iOA Instruction Manual preview
iOA
Brand: i-tec Pages: 14
3onedata GW11 Series User Manual preview
GW11 Series
Brand: 3onedata Pages: 78
Accentronix CELLSWITCH 100 User Manual preview
CELLSWITCH 100
Brand: Accentronix Pages: 22
DIGITAL YACHT iKONVERT Installation And Instruction Manual preview
iKONVERT
Brand: DIGITAL YACHT Pages: 6
DIGITAL YACHT iAIS Technical Notes preview
iAIS
Brand: DIGITAL YACHT Pages: 6

Brands by name

Popular brands

Load more brands