ifm
Device manual AS-i M4 Gateway Profibus DPV1 (AC1375, AC1376)
2012-02-23
Operating and display elements
Display (presentation, language, contrast/brightness)
96
6.2.2
Text/graphics display: Switch language
5454
There are 2 languages stored for the text/graphics display in the device. You can change between the
languages at any time.
MENU
0
USER
simultaneously!
Step 1:
>
Example:
current language = English.
►
[ ] and [ ] pressed simultaneously for about 2 seconds.
Select language
English
German
SET
160
ESC
Step 2:
> Text/graphics display is reinitialised.
> Indication of the current language (here: English).
►
Move to the requested language with [ ] or [ ].
Select language
English
German
SET
160
ESC
Step 3:
►
Select the requested language with [SET].
Language selection
English
German
SET
160
ESC
Step 4:
> Display changes to the requested language.
►
Quit language selection with [ESC].
> That's
it!
English is always available and is set as default language on delivery. The other language depends on
the device version (
AS-i catalogue). Therefore, the menus shown in this manual are only in English.
