100
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Menu
Interfaces
4 Set the failsafe state
►
Set the following parameter as required:
Parameter
Meaning
Possible values
[Failsafe state]
Behaviour of the slave
outputs in case of an
interrupted EtherNet/IP
connection
Hold outputs
=
The outputs hold the values which
were present immediately before
the connection was interrupted.
Output reset
=
The outputs are reset to their initial
values.
5 Set the byte order of a word
►
Set the following parameter as required:
Parameter
Meaning
Possible values
[Change byte order]
Byte order in a data word
= Byte order remains unchanged.
= Byte order is inverted.
6 Save the changes
►
Press [Accept].
>
Selected values are applied.