73
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Menu
System
>
PLC: Diagnosis
10936
The [Diagnosis] menu item provides access to diagnostic data of the device-internal PLC.
>
Show memory used
14845
To display information about the memory capacity currently used:
1 Select the menu page
►
>
>
►
Select [Memory] tab.
2 Show memory used
>
Page shows the following information:
Designation
Meaning
CODESYS
Memory capacity occupied by CODESYS data (in Kbytes)
free
Free memory (in Kbytes)
The current usage of memory space is read out once when calling up the menu page. These
values are not refreshed while the menu page is displayed. Any changes regarding the
memory capacity (e.g. through download of a new CODESYS project) will therefore not be
reflected in the displayed values.
To update the displayed values:
► Quit the menu page [Diagnosedaten].
► Access the menu page [Diagnosedaten] again.
>
The menu page displays the current memory usage of device.
