79
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Menu
System
>
Set the behaviour of the display
9107
To set the display behaviour (screen saver, behaviour in case of inactivity):
1 Select the menu page
►
>
►
Select [System settings] tab.
2 Set the behaviour of the display
►
Set the following parameters as required:
Parameter
Meaning
Possible values
[Screen saver]
Status of the screen saver
=
Screen saver is inactive:
Display remains permanently switched on.
=
Screen saver is active:
Display is switched off after 10 minutes of
inactivity.
[Return to start screen]
Display behaviour in case of
extended period of user
inactivity
=
The currently selected menu page stays on the
screen.
=
When the set time has elapsed, the display
automatically changes to the start screen.
>
Selected values are applied.
