29
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Operation
Page view
>
List
7042
A list provides a set of defined values. The operator can select precisely one value from this set (= 1 of
n selection).
Examples:
= list without caption
= list with caption
Use:
1 Select a list
►
Use arrow key [
] / [
] to select the list.
>
The focus (orange frame) moves to the selected list.
>
The list shows the active value: (in this example
Gateway
).
2 Activate the list
►
Use function key [Select] to open the list.
>
The opened list shows the selectable values.
3 Select a value
►
Use arrow key [
] / [
] to select the desired value from the list.
>
The background colour of the selected value turns orange.
4 Apply the selected value
►
Use function key [Select] to apply the selected value.
OR:
Use function key [Back] to quit and close the list.
>
The list shows the selected value.
The set value will not always become effective immediately. Often the change must be
confirmed by clicking a button (e.g. [Accept selection])!
