35
ifm
Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2
2015-11-30
Operation
Page view
>
Confirmation message
7033
The confirmation message is a security prompt. It appears when important changes are made to the
system settings. The confirmation message shows the changes made. For the changes to become
effective, they first need to be acknowledged by the operator.
Example:
>
Action: Change AS-i slave address from 1a to 1b
>
Confirmation message shows:
– Action (=
Change AS-i address
)
– Slave address prior to change
– Slave address after change
>
The operator has the following input options:
– function key [Select]
– function key [Back]
Use:
1 Change the settings
►
Change the system settings.
>
The confirmation message appears.
2 Confirm the message
►
Use function key [Select] to confirm the changes and apply the new value.
OR:
Use function key [Back] to reject the changes and continue to use the old value.
>
The page displays the valid settings.