background image

3

UK

1  Preliminary note

1.1  Symbols used

Instruction

>

Reaction, result

[…] Designation of pushbuttons, buttons or indications

Cross-reference

Important note 

Non-compliance can result in malfunctions or interference�

1.2  Warning signs used

WARNING

Warning of serious personal injury�  

Death or serious irreversible injuries may result�

2  Safety instructions

•  The device described is a subcomponent for integration into a system�

 -The manufacturer of the system is responsible for the safety of the system�
 -The system manufacturer undertakes to perform a risk assessment and to 

create a documentation in accordance with legal and normative requirements 

to be provided to the operator and user of the system� This documentation 

must contain all necessary information and safety instructions for the operator, 

the user and, if applicable, for any service personnel authorised by the 

manufacturer of the system�

•  Read this document before setting up the product and keep it during the entire 

service life�

•  The product must be suitable for the corresponding applications and 

environmental conditions without any restrictions�

• 

Only use the product for its intended purpose (→ Functions and features).

•  If the operating instructions or the technical data are not adhered to, personal 

injury and/or damage to property may occur�  

•  The manufacturer assumes no liability or warranty for any consequences 

caused by tampering with the product or incorrect use by the operator�

Summary of Contents for O5D10 Series










Reviews: