8
Mounting the adapter
►
Slightly grease the threads and
sealing areas of the sensor and
adapter with lubricating paste (1)�
The paste must be suitable and
approved for the application and
compatible with the elastomers
used�
Recommendation: Klüber paste
UH1 84-201 with USDA-H1
approval for the food industry�
►
Make sure that the O-ring (B) is
correctly positioned�
B
1
►
Screw the sensor into the adapter
until it is hand-tight� Do not damage
the sealing chamfers�
►
Clamp sensor and adapter into a
clamping device (E)� Tighten the
clamping device only slightly so
that the adapter does not warp� The
sealing chamfers (F) must not be
damaged�
►
Tighten the sensor using a spanner
until you can feel the end stop�
E
F
36
Welding adapter
First weld the adapter, then mount the sensor� Follow the instructions included
with the adapter�
