IFO 6832, Assembly Instructions Manual

9

Ifö Sign 6860, 6861

You have chosen the optimum standard WC unit with 

built-in S-lock. It can usually be installed as quickly 

and easily, and in the same situations, as WC units 

with traditional open S-locks. Maximum dimensions for 

installation on old cast iron connectors, see image     . 

If the cast iron connectors are too large – cut (image     ) 

and install with WC connection Ifö-no 96525, see image      . 

Remember that the cover must be positioned before 

installation, see image      .

3

4

2

6

Available as an option: 

Cover strip in white silicone rubber Ifö no. 98021

Cover strip

This WC is prepared for the Fresh WC function, with a 

hygienic dosing of a tablet through the flush button.   

The tablet is placed inside the flush armature by opening 

the flush button and releasing the tablet in the blue cover 

screw, as illustrated in images      -      .  

Depending on the content of the tablet, it produces a fresh

odour, cleaning effect on the whole bowl and colour.

13 14

Dosing

WC connections

The water connection to the inlet pipe is flexible 

vertically and also partially flexible laterally, for simple 

and fast installation to most existing water pipes, 

see image      . Connection dimensions and other 

dimensions on WC units according to dimension 

diagrams page     - 

Available as an option: 

Eccentric WC connection, 13 mm flexibility. Ifö no. 

99636. Installation, see image      . 

Centric WC connection, Ifö-no. 96525. 

Installation, see image      . 

1

25

2

2

Available as an option for Ifö Sign 6862: 

White waste connector S- respectively P-lock. 

Ifö no. 96501 respectively Ifö no. 96507.

See image      .

5

Waste connectors

Siliconing

This WC unit is suitable for bonding / siliconing, see 
images      -     .
The method applies to installation of WC units using 
elastic silicone joint. First clean the floor to obtain a dry 
and grease free surface. Do not use the WC before the 
silicone has cured. 
If the WC unit is bonded / siliconed to the floor, the 
supplied blind cover plugs, Ifö no. 94752, must be used 
in the screw holes on the WC unit.
Silencing strip, sylomer or similar (w=5mm x h= 2mm) 
may be used.
Mounting using only adhesive/silicone together with 
armrest mounted onto the WC unit is not recommended.

7 12

This solution differs from traditional odour and cleaning 

blocks that are suspended from the rim of the bowl, by 

perfectly rinsing the entire bowl and retaining full flushing 

effect.

The tablets, Fresh WC, can be purchased from your local 

plumbing centre or from where the WC was purchased.

Consumer contact: orderexp@ifo.se

Ifö Sign 6870, 6873

This is the perfect WC unit when renovating. Supplied 

with open S-lock and large foot to conceal old screw 

holes in the floor. 

Installed where Ifö Sign 6860 cannot be used, for 

example, when the old connector is too large and cutting 

is not possible.

Thank you for choosing Ifö Sign.

You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit. 

To guarantee correct and reliable installation of this product we urge you to follow the installation 

instructions. Ifö cannot accept liability for damage that occurs as a result of faulty installation. 

GB

Water proof floor mounting

Available as an option: 

Water proof floor mounting Ifö no. 98015.

Water proof floor mounting for bonding Ifö no. 98030.

Ifö Sign Art 6840

You have chosen the optimum WC unit with built-in S-

lock. It can usually be installed as quickly and easily, and 

in the same situations, as WC units with traditional open 

S-locks. Maximum dimensions for installation on old cast 

iron connectors, see image     . 

If the cast iron connectors are too large – cut (image     ) 

and install with WC connection Ifö-no 96525, see  

image     . 

Remember that the cover must be positioned before 

installation, see image      .

3

4

2

6

Ifö Sign 6832, 6862, 6872

This WC unit is designed for connection to waste in 

walls – P-lock. 

Waste connectors are available as an option, see image       .

Ifö Sign 6832 has a flexible water connection. The WC 

pedestal is delivered with a connector on the right, but this 

is what you do to change to a connector on the left:

Remove the cistern lid as shown in 

images

      -      . Pull 

down the shut-off valve from its transport position (

image

) and pull the hose of the outlet. Then move the hose to 

the outlet on the left side. Do not pull up the shut-off valve 

immediately, but let it hang down while you refit the cistern 

cover. Then return the shut-off valve to its transport position 

if you so wish (

image

      ).

5

1

13 19 

1

27