iFocus DVRA+/B+/E+ Manual Version 4.2
Page 16 of 40
Figure 19: Menu, Camera Display Properties
9.4
Camera Settings
iFocus DVR provides settings of camera name, view and Smart Adaptive Exposure
(SAE) for individual camera.
To change these settings, press “4” and use “F
in
” or “F
out
” keys to select the camera of
which the settings are going to be changed.
The followings are the settings available for each camera:
Camera Name
Camera View
Camera SAE
9.4.1 Set Camera Name
Camera title setting allows the user to assign meaning to the camera for easy memory.
As an example, “Lobby” and “Office” are more memorable than “Cam 01” and “Cam
02”.
To set the camera name,
a.
Press “5” for “Set Camera Name”
b.
Use “F
in
” and “F
out
” key to change characters
c.
Use arrow keys to move to the next character
d.
Press “OK” to confirm the setting
[Note: this operation is done more easily on remote monitoring system. Refer to its
manual (soft copy in the user CD) for details. ]
9.4.2 Turn on or off camera view
Camera View allows the user to turn on or off the camera display at the local monitor
as well as remote monitoring system under normal user log-in mode. This is to disable
the camera display for those cameras located at sensitive locations.
To turn on or off the camera display,
a.
Press “6” for “Camera View”
b.
Use “F
in
” or “F
out
” keys to turn on or off the camera view
Camera Display Properties
CardNo
Brt Color Ctrt
1 Card.1
[ 50] [ 35] [ 65]
2 Card.2
[ 50] [ 35] [ 65]
3 Card.3
[ 50] [ 35] [ 65]
4 Card.4
[ 50] [ 35] [ 65]
5 Card.5
[ 50] [ 35] [ 65]
6 Card.6
[ 50] [ 35] [ 65]
7 Card.7
[ 50] [ 35] [ 65]
8 Next page
0 Exit
Camera View
1 View Mode
[4 Split]
2 Spot TV Out
[Seq] [3sec]
3 Camera Display Properties
4 Camera Select
[Cam01]
5 --Set Camera Name
6 --Camera View
[ On]
7 --Camera SAE
[ On]
0 Exit
