iFocus DVRA+/B+/E+ Manual Version 4.2
Page 20 of 40
Yokogawa
code in Menu: [YOKOGAWA PTZ]
Panasonic
code in Menu: [PANASONIC PTZ]
VideoTec
code in Menu: [VIDEOTEC PTZ]
Kalatel
code in Menu: [KALATEL PTZ]
D-Max
code in Menu: [D-MAX PTZ]
Modems that iFocus DVR support:
Prolink (PSTN Modem)
code in Menu: [Pro 1456ESI]
AZTeck (PSTN Modem)
code in Menu: [Aztech/ Pro-TR]
iTegno (GPRS Modem)
code in Menu: [iTegno]
Matrix switches that iFocus DVR support:
All that using Pelco ASCII
code in Menu: [PELCO A PTZ]
10.4.8 Network Setting
Each DVR that uses TCP/IP protocol must have a unique IP address.
If the DVR is connected in a LAN/WAN environment via the RJ45 network
connector, the IP address, Net Mask and Gateway must be obtained from the Network
Administrator.
If the DVR is connected to the ADSL/SDSL modem (for internet access), the ADSL
router should be programmed to forward all the external ports to the internal port of
the DVR IP address. For DNS setting, please refer to the ISP provider. The default
HTTP port is 80 and video port 33330.
To change the network settings,
a.
Press “8” for “Network Setting” under Communication Menu
b.
Use arrow keys to move among different fields
c.
Use numeric keys to key in IP or port number
d.
Use down arrow key to select “Confirm”
e.
Press “OK” to confirm the new settings
Figure 24: Menu, Network Setting
Setup Menu
1 Date/Time
2 Time Zone
Singapore
3 Supervisor Pin
4 User Pin
5 Storage Option
6 Communication
7 Key Lock
[Off]
8 Re-Init
[Off]
9 Archive to Optical Disc
0 Exit
Communication
1 Modem Rings
[ 1]
2 TEL [
]
3 Dial OutIP [000.000.000.000]
4 Server IP [192.168.003.125]
5 Server Port
[18375]
6 DVR ID
[0000000001]
7 PTZ
[LILIN PTZ]
8 Network Setting
0 Exit
Network Setting
IP Address
[192.168.001.222]
Subnet Mask [255.255.255.000]
Gateway
[192.168.001.021]
1st DNS
[165.021.083.088]
2nd DNS
[161.000.000.000]
HTTP Port
[00080]
MAC Address
00161777FFB2
‘Confirm’ (DVR will Reboot)
‘Cancel’
