iFocus DVRA+/B+/E+ Manual Version 4.2
Page 28 of 40
12.2 Motion Trigger
iFocus DVR are built in with Video Motion Detection (VMD) for individual video
channel. VMD sensitivity and zone can be set independently for each channel available
under Motion Trigger Menu.
Under the Trigger Menu, press “2” to access Motion Trigger Menu.
Figure 37: Menu, Motion Trigger
The setting of the motion trigger is shown in the following diagram. Similarly, the motion
trigger can be programmed with the following options.
Off:
No Motion Trigger
On:
To enable the VMD function of a particular channel
ARM:
To enable the email alert function of the particular channel
12.2.1 Motion Grid Setting
Under the Trigger Menu, user can
program the motion detection areas
for individual camera.
To enter motion detection grid setting
for a particular channel,
a.
Press “3” for “Motion
Properties Adj” under the
Trigger Menu.
b.
Use “F
in
” or “F
out
” key to
select this channel
c.
Press “4” to access Motion Grid Setting
The full screen view of the channel
will be displayed with ten-dot motion
detection zone. When dots are grouped
as shown in Group A in Figure 37,
only areas within the dot-area is
equipped with VMD. When dots are
spread as shown in Group B, full
screen VMD is enabled.
To set the motion grid for a channel
through remote control,
a.
Use “Play” Key to toggle between Group A and B
b.
Use arrow keys to change the position of the dot-area
c.
Use fast forward and rewind key to change the coverage of the dot-area
Motion Trigger
1 Motion1
1[ On] 9[Off]
2 Motion2
2[Off] 10[ On]
3 Motion3
3[Arm] 11[Arm]
4 Motion4
4[Arm] 12[Arm]
5 Motion5
5[Off] 13[Off]
6 Motion6
6[Arm] 14[ On]
7 Motion7
7[ On] 15[Off]
8 Motion8
8[Arm] 16[ On]
0 Exit
Trigger Menu
1 External Trigger
2
Motion Trigger
3 Motion Properties Adj[Cam01]
4 --Motion Grid Setting
5 --Motion Sensitivity [High]
6 System Trigger Delay
[120]
7 System Arm Delay
[120]
0 Exit
Trigger Menu
1 External Trigger
2 Motion Trigger
3 Motion Properties Adj[Cam01]
4 --Motion Grid Setting
5 --Motion Sensitivity [High]
6 System Trigger Delay
[120]
7 System Arm Delay
[120]
0 Exit
7
Timer Setting
Figure 38: Menu, Trigger Menu
(Motion Properties and System Trigger Delay)
Chapter 12.2.1
Motion Grid
Setting
Chapter 12.2.2
Motion
Sensitivity
Chapter 12.2.3
System Trigger
Delay
Group A: Two
Group B: Full
Figure 39: Default Motion Grid Setting
