P/N 1073709-EN
• REV
C
• ISS
03JUL22
1 / 4
NS3500
-24T-4C-
V2 Quick Installation Guide
Figure 1: NS3500-24T-4C-V2 L2+ Gigabit Managed Switch
Package contents
Thank you for purchasing
the
NS3500
-24T-4C-
V2
IFS
L2+
Gigabit Ethernet managed switch, which comes with multiple
RJ45 copper ports suitable for
a Gigabit Ethernet switch with
SFP fiber optic connectibility and robust layer 2 and layer 4
features
. T
he descriptions
of this model
are as follows
:
L2+ 24-
Port 10/100/1000BASE
-T
+ 4-
Port Shared SFP Managed Switch
Unless specified, the
term
“
managed switch
”
mentioned in
this
quick installation guide
refers to the
NS3500
-24T-4C-
V2
.
Open the box of the managed switch
and carefully unpack it.
The box should contain the following items:
T
he managed switch
× 1
Quick installation guide
× 1
RS232 to
DB9
cable x 1
Rubber feet x 4
Two rack
-
mounting brackets with attachment screws x 1
Power cord x 1
SFP dust
-
proof cap x 4
If any of these are
missing or damaged, contact your dealer
immediately. If possible, retain the carton including the original
packing materials for
repacking
the product in case there is a
need to return it to us for repair.
Requirements
The managed
switch
provide
s
a
remote login
interface for
management purposes. The following equipment is necessary
for further management:
Workstations running Windows
®
10 / 7 / 8 / 2008 /
Vista
/
2003 / XP
, MAC OS
X
or later, Linux, UNIX,
or other
platforms are
compatible with TCP/IP protocols.
Workstations are
installed with Ethernet NIC (Network
Interface Card)
Serial port connection (Terminal)
The above workstations come
with
a
COM Port
(DB9)
or USB
-
to
-
RS232 converter
.
The above workstations
have been
installed with a
terminal emulator, such as
Hyper Terminal included in
Windows
XP/2003.
Serial cable
– O
ne end is attached
to the RS
232
serial port,
and the other end is attached to the
console port of the managed switch.
Ethernet port connection
Network cables
– U
se standard network (UTP) cables
with RJ45 connectors.
The above
workstations
have
a Web browser
and
JAVA runtime environment plug
-
in
installed
.
Note
:
We
recommend using
Internet Explorer
11
.0 or later
to
access the
managed
switch
.
If the web interface of the
managed switch
is not accessible, turn off the anti
-
virus
software or firewall
and
then try
it
again.
Terminal setup
To configure the system, connect a serial cable to a COM port
on a PC or notebook computer and to an RS232
type serial
port on
the managed switch
.
Figure 2: Console connectivity
A terminal program is required to make the software connected
to the managed
switch. Windows' Hyper Terminal program
may be a good choice.
The Hyper Terminal can be accessed
from the
Start
menu.
1.
Run the terminal program on the OS.
2.
When the following screen appears, ensure that the COM
port is
configured as
shown
below. Click
OK
w
hen finished
with configuration.
