P/N 1108-EN
• REV
A
• ISS 29SEP22
1 / 4
NS3502
-8P-2T-
2S
-
V3 Quick Installation Guide
Figure 1: NS3502-8P-2T-2S-V3 Industrial L2+ Multi-port Full
Gigabit Managed Ethernet Switch
Package contents
Thank you for purchasing
the
NS35
02-8P-2T-
2S
-
V3
IFS
L2+
managed PoE switch
.
Unless specified, the
term
“
managed switch
”
mentioned in this
quick installation guide
refers to the NS3502
-8P-2T-
2S
-
V3
.
Open the box of the managed switch
and carefully unpack it.
The box should contain the following items:
T
he managed switch
× 1
Quick installation guide
× 1
RJ45 to
RS
-
232 cable
× 1
Rubber feet
× 4
Two rack
-
mounting brackets with attachment screws
× 1
Power cord
× 1
SFP dust
-
proof
cap
× 2
If any of these are
missing or damaged, contact your dealer
immediately. If possible, retain the carton including the original
packing materials for
repacking
the product in case there is a
need to return it to us for repair.
Requirements
The managed switch
provide
s
a
remote login
interface for
management purposes. The following equipment is necessary
for further management:
Workstations running Windows
®
XP /
2003
/
Vista
/ 7 / 8 /
2008 / 10
, MAC OS
X
or later, Linux, UNIX,
or other
platforms are
compatible with TCP/IP protocols.
Workstations
are
installed with Ethernet NIC (Network
Interface Card)
Serial port connection (Terminal)
The above workstations come
with
a
COM Port
(DB9)
or USB
-
to
-
RS232 converter
.
The above workstations
have been
installed with a
terminal emulator, such as
Tera
Term, PuTTY, or
Hyper Terminal included in Windows.
Serial cable
– O
ne end is attached
to the RS
-
232
serial port,
and the other end is attached to the
console port of the managed switch.
Ethernet port connection
Network cables
– U
se standard network (U
TP
) cables
with RJ45 connectors.
The above
workstations
have
a web browser
and
JAVA runtime environment plug
-
in
installed
.
Note
: We
recommend using
Internet Explorer
11
.0 or later
to
access the
managed switch
.
If the web interface of the
managed switch
is
not accessible, turn off the anti
-
virus
software or firewall and then try it again.
Terminal setup
To configure the system, connect a serial cable to a
COM port
on a PC or notebook computer and to RJ45 type serial
(console) port of the managed switch
.
Figure 2: Managed switch console connectivity
A terminal program is required to make the software connected
to the managed switch. Windows' Hyper Terminal program
may be a good choice.
The Hyper Terminal can be accessed
from the
Start
menu.
1.
Click
Start
>
Programs
>
Accessories
>
Hyper
Terminal
.
2.
When the following screen appears, ensure that the COM
port is
configured as
shown
below. Click
OK
when finished
with configuration.
