4 / 4
P/N 1108-EN
• REV
A
• ISS 29SEP22
Saving the configuration
The running configuration file
is stored in the RAM of the
managed switch. In the current version, the running
configuration sequence of running
-
config can be saved from
the RAM to FLASH by executing the Save Configuration
command. After doing this, the running configuration sequence
becomes the startup configuration file (i.e., the
saved
configuration)
.
To save all applied changes and set the current configuration
as a startup configuration, the startup
-
configuration file is
loaded automatically across a system reboot.
1.
Click
System
>
Save Startup Config
.
2.
Click the
Save Configuration
button.
Resetting the switch to default
To reset the IP address
to the default IP address
“192.168.0.100”
and the user
password to factory default mode
(default password is
“
admin
”
), press the hardware reset button
on
the front panel for about
10
seconds. After the device is
rebooted, log
in to the management web
interface within the
same subnet of 192.168.0.xx
and default password.
N
ote
that
all the previous setups are erased
after the factory default
reset.
Figure 10: Managed switch reset button
Contact information
Copyright
© 2022
Carrier. All rights
reserved.
The
information in this manual is subject to change
without prior notice
.
This document may not be copied in whole or in
part or otherwise reproduced without prior
written consent from Carrier, except where
specifically permitted under US and
international copyright law.
Trademarks and
patents
IFS
names and logos are a product brand of
Aritech, a part of Carrier
.
Other trade names used in this document may
be trademarks or registered trademarks of the
manufacturers or vendors
of the respective
products.
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation
Inc.
13995 Pasteur Blvd, Palm Beach Gardens, FL
33418, USA
AUTHORIZED EU REPRENSENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH
Weert, Netherlands
Certification
2012/19/EU (WEEE directive): Products
marked with this symbol cannot be disposed of
as unsorted municipal waste in the European
Union. For proper recycling, return this product
to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at
designated collection points. For more
information see: www.recyclethis.info.
Contact
information
EMEA:
https://firesecurityproducts.com
Australian/New Zealand:
https://firesecurityproducts.com.au/
