NS3503
-16P-4C-
V2 Quick Installation Guide
3
5
.
Repeat Step 1 to check if the IP address
has
changed.
If the IP is successfully configured, the
Managed
Switch
will apply the new IP address setting
immediate
ly. You can access the
W
eb interface of
the NS3503
-16P
Managed Switch through the new
IP address.
Note
:
If you
are
not familiar with console command or
the related parameter, enter “
?
” anytime in console to
get the help description.
Saving the Configuration via the
Console
In
the
switch, the running configuration file
is
store
d
in
the RAM. In the current version, the running
configuration sequence of running
-
config
can be saved
from the RAM to FLASH by
writing
the
command or
copying
the
running-config startup-config
command,
so that the running configuration sequence becomes the
startup configuration file, which is
the
configuration
saved.
1. At the “
NS3503-16P-V2#
”
prompt, enter
“
copy
running-config startup-config
” a
s shown
in below.
Figure 6: The Configuration Screen
Starting Web Management
The following shows how to start up the
Web
Management
of the
Managed Switch. Note the
Managed Switch is configured through an Ethernet
connection
. P
lease make sure the manager PC must be
set
to
the same
IP subnet address
.
For example, the default IP address
of the
Managed
Switch is
192.168.0.100
, then the manager PC should
be set to
192.168.0.x
(where x is a number between 1
and 254, except 100), and the default subnet mask is
255.255.255.0.
Figure 7: IP Management Diagram
Logging in to the Managed Switch
1.
Use Internet Explorer
8
.0 or above Web browser
to
access
the Web interface.
2.
When the following dialog box
appears, please enter
the default user name and password “
admin
”. The
login screen below
a
ppears.
Default Username:
admin
Default Password:
admin
Figure 8: Login Screen
1.
When a user log
s
in to the switch via web or
console with
the
default account (admin / admin),
the
switch will display
a warning message to notify
that a
change
to
the
username and password
is
required
.
Figure 9: Warning message
2.
Type a new username and password in the Edit
User page, using the
guidelines. Click
Apply
.
Figure 10: User name and password change
3.
After typing the new username and password in the
login window, the main screen appears as shown
in figure below
.
