POC2502 Series User Manual
332
The page includes the following fields:
Object
Description
•
System PoE Admin
Mode
Allows user to enable or disable PoE function. It will cause all of PoE ports to
supply or not to supply power.
•
PoE Management
Mode
There are six modes for configuring how the ports/PDs may reserve power and
when to shut down ports.
Consumption mode:
The system offers PoE power according to PD real
power consumption.
Allocation mode:
Users allow to assign how much PoE power to each port
and the system will reserve PoE power to PD.
•
Temperature
Threshold
Allows setting over temperature protection threshold value. If the system
temperature is overly high, the system will lower the total PoE power budget
automatically.
•
PoE Temperature
Display the PoE Chip Temperature
This section displays the
PoE Power Usage
of Current Power Consumption as
Figure 4-16-2
shows.
Figure 4-16-2:
Current Power Consumption Screenshot
This section allows the user to inspect and configure the current PoE port settings
as
Figure 4-16-3
shows.
Figure 4-16-3:
Power over Ethernet Configuration Screenshot
The page includes the following fields:
Object
Description
•
PoE Mode
There are three modes for PoE mode.
Enable
: enable PoE function..
Disable
: disable PoE function.
Summary of Contents for POC2502 Series
