How to use IGX-750
Turn on the headset
When the headset is off, press and hold the multifunction button for 3 seconds until
the blue LED turns on for 3 seconds.
Turn off the headset
When the headset is on, press and hold the multifunction button for 3 seconds until
the red LED turns on for 3 seconds.
Paring
Pairing is the process of establishing encrypted link between IGX-750 and Bluetooth
devices.
Step-1
Make sure the IGX-750 is switched off, then press and hold multifunction
key for about 7 seconds until the red and blue LED flash alternatively with “pairing”
prompt.
Step-2
Follow the operating instruction of your Bluetooth device to start the pairing
process. Typically, this is done by going to a “Connect” or “Setup” menu and then
selecting the option to search for
IGX-750
that is still in the pairing mode.
Step-3
The mobile will find IGX-750 headset and ask whether you are willing to
connect your device with the headset. Press “Yes” or “Confirm” to confirm this
action.
Step-4
Your device’s display might then prompt you for a passkey or PIN. Enter
0000 (a sequence of four zeros) and the display should prompt the pairing result.
If the connection is successful, the blue LED of the headset will flash 3 times. Then
blue LED will flash one time every 7 seconds. If the pairing is unsuccessful, please
turn off the headset and turn it on again. Then, return to Step-1 and do the pairing
procedure again.
Make a Call
Step-1
Use the mobile phone’s keypad to dial the phone number.
Step-2
Press mobile phone’s “Send” or “OK” key. The mobile phone initiates the call
and transfer the call from the mobile phone to the headset.
Voice dialing (dialing a number by saying a name)
It is possible to make a call directly from the headset using voice recognition. To use
this voice dialing function, your mobile phone must provide this option and
corresponding voice samples must have been recorded.
Step-1
Enable voice recognition function of your mobile and set the mobile to
Handsfree state.
Step-2
Double press the multifunction button of the headset, you will hear a beep
prompt.
Step-3
Say the name of the person you wish to call loudly.
Answer a Call
Step-1
If there is an incoming call while you are listening to the streaming music,
you will hear beep prompt from headset.
Step-2
Just press multifunction key one time.
