26
iGage
iG8 User Manual
4.
From the ‘Equip’ menu:
Click on the ‘GPS Base’ button.
5.
After a moment, the ‘Current’ tab will be displayed:
Set the Manufacture to ‘iGage’ and the Model to
‘IG8’as shown above.
6.
Click on the ‘Comms’ tab:
(1) set the ‘Type’ to ‘Bluetooth’.
(2) Set the ‘BT Type:’ to ‘Windows Mobile’,
then (3) click the Configuration button (the
‘hammer / wrench’ icon) to the right of the ‘BT
Type’.
7.
If your Base receiver is not listed in the BT Device
grid, click the ‘Find Device’ button:
Wait up to 30-seconds while the data collector
searches and identifies Bluetooth devices:
8.
A list of nearby devices will be shown.
(1) Click the correct Base device to select it,
then (2) click on the green check mark.
