106
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
•
Softpro
•
StepOver TCP
•
signotec VCOM Daemon
Enable the
Softpro SPVC signature pad channel
in the IGEL Setup under
Sessions > Citrix
XenDesktop / XenApp > HDX / ICA Global > Mapping > Device Support
.
To enable the
StepOver TCP Client
in order to be able to use USB signature pads from this manufacturer in
sessions, proceed as follows:
Select the checkbox for
StepOver TCP Client
.
1.
If necessary, you can change the TCP port.
Click on
Apply
.
2.
You will find detailed information regarding the configuration of signature pads in the Best Practice
documents for
StepOver Pads
(
http://edocs.igel.com/#10202863.htm
) and
Softpro/Kofax pads
(
http://edocs.igel.com/#10202863.htm
).
To enable the
signotec VCOM Daemon
in order to be able to use USB signature pads from this
manufacturer in sessions, proceed as follows:
Select the checkbox for
signotec VCOM Daemon
.
1.
Click on
Apply
.
2.
Go to
Mapping > Serial Connections
under ICA or RDP Global.
3.
Enable
COM Port Mapping
.
4.
Click on
Add
and choose one of these devices
Search Devices
.
5.
Under
Select Available Device
, you can choose from the
signotec
devices /dev/ttyVST0 and
/dev/ttyVST1.
Select one of these devices.
6.
Your
signotec
signature pad can now be used.
7.
7.5.6.
Hotkeys
Menu path:
Setup > User Interface > Hotkeys > Commands
In order to make it easier to use your thin client, hotkeys are available for frequent operating routines. A
hotkey is a combination of one or more modifiers and an alphanumeric key.
You can enable or disable hotkeys and change the keys used.
To enable or disable a hotkey, proceed as follows:
Highlight the hotkey in the list.
1.
Click on
Modify...
.
2.
Enable or disable the
Hotkey
option in the dialog window.
3.
Click on
Continue
in the dialog window.
4.
Click on
Apply
or
OK
.
5.
