133
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
Possible values:
-
Yes
: Write access is allowed.
-
No
: Write access is not allowed.
-
Ask user
: Write access can be allowed on request.
•
Use storage hotplug beep
: If this option is enabled, a signal tone will be heard when connecting and
disconnecting hotplug storage devices.
•
Show storage hotplug message
: If this option is enabled, hotplug messages will be shown when
connecting and disconnecting hotplug storage devices.
•
Message timeout
: Period of time after which the window with the hotplug messages is hidden. If the
time period is set to 0, the window will be shown until it is closed manually.
Further settings options can be found under
Drive Mapping (Citrix)
(page
23
), Drive Mapping (RDP) and
USB Access Control
(page
134
).
9.2.2.
Automount Devices
Menu path:
Setup > Devices > Storage Devices > Automount
Here you can define the devices which are to be mounted automatically when accessed:
List of automount devices
Overview of the automount devices - The most commonly used devices
such as the disk drive, CD-ROM etc. are pre-configured.
Edit
Opens and enables one of the pre-defined devices
Add
Manual configuration of devices not pre-defined in the automount device
list
.
Name
Name given to a device - This name is also used for the sub-directory
created in
/autofs/
.
Device
Allows you to select a suitable device synonym - This can also be entered
manually.
File system type
Definition of the file system - The
auto
option should normally be used. If,
however, you use
ext2
or a problem occurs, you should clearly indicate
the file system that you use.
Automount time-out
Regulates the time-out period - Specify in seconds how long the system
should wait before the devices accessed are unmounted. The time period
ranges from 0 to 600 seconds (10 minutes).
Do not set the time-out period to zero! This may result in data loss.
