135
IGEL
Technology GmbH
IGEL Zero HDX
5.09.100
To create a
Device Rule
, proceed as follows:
When a rule is defined, at least one of the properties
Vendor ID
or
Product ID
or
Uuid
must be
given.
To create a new rule, click
in the
Device Rules
area.
1.
Choose a
rule
. The rule specifies whether use of the device defined here is allowed or prohibited.
2.
Give the
Vendor ID
of the device as a hexadecimal value.
3.
Give the
Product ID
of the device as a hexadecimal value.
4.
Give the
Device Uuid
(Universal Unique Identifier) of the device.
5.
Specify
Permissions
for the device.
6.
Possible values:
-
Global setting
: The default setting for hotplug storage devices is used; see
Default Permission
parameter under
Hotplug Storage Devices
(page 131).
-
Read only
-
Read/Write
Under
Name
, give a name for the rule.
7.
Click on
Next
.
8.
Click on
Ok
or
Cancel
.
9.
The rule is active.
Example:
•
The set rule prohibits the use of USB devices on the thin client.
•
A class rule allows the use of all entry devices (HID = Human Interface Devices).
•
A device rule allows the use of the USB storage device with the UUID
67FC-FDC6
.
•
The use of all other USB devices, for example storage devices or printers , is prohibited.
Figure 62: USB access control
Further settings can be found under
Storage Hotplug
(page
131
).
