2
SAFETY INSTRUCTIONS
Important: This appliance is not intended for use by persons including children with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliances by a person responsible for their safety.
1.
Read all instructions before using the appliance.
2.
This appliance is for domestic use only. This appliance is for indoor use only. Do not use outdoors.
3.
Make sure the voltage in your home corresponds to the one shown on the rating label of the appliance.
4.
Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has
been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
5.
WARNING: Children should be supervised to ensure that they do not play with the appliance.
6.
Place fan on a flat even surface.
7.
Do not use an extension lead with this desk fan.
8.
Do no insert fingers or objects through the blade guard.
9.
Do not use in damp areas such as bathrooms.
10. Do not use by a window.
11. Do not use with semi-conductors speed control.
12. This fan should not be operated without the base fitted or laying down.
13. Do not cover the power cord. Ensure the position of the cord does not pose a hazard.
14. Unplug the fan when not in use.
15. Do not leave unattended whilst in use.
16. Do not operate in areas where flammable liquids such as paint and petrol are used.
17. This fan must not be earthed.
Specifications
Voltage
220-240V, 50Hz
DF9010 Output:
30 Watts
DF1210 Output:
40 Watts
DF1610 Output:
40 Watts
Desk Fan At a Glance
Base Assembly
1. Detach screw from the base.
2. Match the locking tab to the base and click into position.
3. Tighten the screw in the base to secure the fan to the base.
1. Front guard
2. Blade
3. Plastic nut
4. Rear guard
5. Motor shaft
6. Oscillation control
7. Fan body
8. Screw
9. Spinner
10. Base
11. Plastic nut
12. On / Off and speed controls
13. 14. Blade Fastener. Clockwise to
loosen. Anti-clockwise to tighten
