background image

7

Functions

Dehumidify Mode:

Manual: Within this mode you can manually select the desired humidity level (between RH30% 

to RH80%) and Fan Speed (High/Low).

Auto: This mode will automatically find the most efficient and economical way to run; according 

to the relative humidity and ambient temperature of the room.

High: This mode will operate in a high working status with the fan at a high speed to dehumidify a 

room very quickly. It is suggested to switch to Auto mode once the relative humidity goes down to 
save more energy.

Dry Clothes: This mode will operate in a medium working status with the fan at high speed, this 

mode is ideal to dry laundry. 

Ioniser Mode:  

Working in conjunction with the Active Carbon Filter; this mode releases negative ions into the air 
in order to make the air fresher and healthier.

Note: This mode will only operate the fan; dehumidifying functions cannot be selected when 

Ioniser Mode is on. 

Humidity Setting: 

The

 Humidity level can be set between RH30% to RH80% (increasing in increments of 5%)

Note: This mode can only be selected when in Manual dehumidifying mode.

Fan Speed: 

Fan speed can switch between High and Low when the unit is operating in Manual dehumidifying 
mode or Ioniser mode.

Timer:

24 Hour Programmable Timer can be used to switch on the unit after a desired period of time; or 
can be used to switch off the unit after a desired period of time.

Note: Timer can be selected between 1 to 24 hours (in increments of 1 hour)

How to use Timer to switch on appliance:

•  Plug the appliance into a suitable wall socket – the appliance will beep once and will remain in  
  Standby Mode. 
•  Press the Power On/Off Button to switch on the appliance.
•  The white illuminating LED will automatically display the Relative Humidity of the room; you can  
  now select the desired function.
•  Once function is selected, press the Power On/Off Button to switch appliance back to  
  Standby Mode.
•  Press the Timer Button to select the desired amount of time until you would like the  
  appliance to switch on (the LED display will show the hours, continue to press the button until  
  correct number of hours reached)
•  The LED display panel will flash 4 times and then the control panel will switch to standby mode,  
  with the timer indicator illuminated.
•  The appliance will switch on after selected period.   

How to use Timer to switch off appliance:

•  Plug the appliance into a suitable wall socket – the appliance will beep once and will remain in  
  Standby Mode. 
•  Press the Power On/Off Button to switch on the appliance.
•  The white illuminating LED will automatically display the Relative Humidity of the room; you can  
  now select the desired function.

Summary of Contents for IG9821

















Reviews: