Click
Alarm
button to configure the PIR detection alarm function:
Buzzer:
The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in
seconds when the PIR is detected.
Alarm Out:
Optional function. If your NVR support to connect to external alarm device, you can set to
emit an alarm tone.
Latch Time:
To configure the external alarm time when PIR detection is triggered.
Record:
Click icon and choose which channel(s) you want to record when the PIR detection is triggered.
Post Recording:
You can set how long after an event occurs that the NVR will continue to record. The
recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Show Message:
Check the box to displayPIR on the live view screen when the PIR alarm is detected.
Send Email:
You can let the NVR to send you an auto-email when PIR detection is triggered.
Full Screen:
If this function is enabled and PIR is detected in a channel, you will see that channel in full
screen.
5.2 Record
This menu allows you to configure the recording parameters
This menu allows you to configure the recording video or network transmission picture quality. Generally,
Mainstream defines the recording video quality which will be saved in the HDD; Sub stream defines the
video quality which is being viewed via remote access, for example web client & CMS; Mobilestream
defines the video quality which is being viewed via remote access via mobile devices.
5.2.1 Encode
This model does not support this feature
5.1.7 Intelligent
25