5.3.4 PTZ Linkage
If you had connected the PTZ cameras, you can set the linkage between PTZ cameras and Motion Alarm
and/or PIR sensor alarm. With the linkage function, you can turn your PTZ cameras focus to the preset
point when a motion or PIR alarm happens.
Switch:
Enable or disable the PTZ linkage function.
Motion:
Motion detection alarm will trigger the PTZ linkage function it is checked.
PIR:
PIR alarm will trigger the PTZ linkage function it is checked.
PTZ:
Click icon to associate the PTZ cameras with preset points.
5.3.5 Exception
This menu allows you to set the type of events that you want the NVR to inform you.
Event Type:
Select the event type from below options:
- No Space on Disk:
When an HDD is full.
- Disk Error:
If the HDD is not detected properly.
- Video Loss:
If a camera is not connected properly.
Switch:
Check the box to enable the monitoring of the event.
Buzzer:
Set the buzzer duration when the event occurs (Off/10s/20s/40s/60s). To disable buzzer, select
OFF
.
Latch Time:
This is an optional function. Determine how long the external alarm device to sound (10s,
20s, 40s, 60s) if your NVR support to connect external alarm device.
Alarm Out:
This is an optional function. Click to enable the external alarm device to sound. This is an
optional function.
Show Message:
Check the box to display a message on the screen when No Space on Disk, Disk Error,
or Video Loss event happens.
Send Email:
Let the NVR to send you an auto-email when an event occurs.
29