EN
12
USER MANUAL
Basic information
-
Individual parameters, description by figures and design in the manual may differ depending on the version and updates.
- Printing errors reserved.
- Update your device as soon as a new version of software is available.
For the proper making of any complaint we advice to ask your dealer for filing up and confirming this warranty card including the
statement of serial number of the product purchased, which must match the serial number, referred to as the proof of purchase
and delivery note, as well as the purchased product. The warranty card is on the last pages of this manual.
Warning:
The camera resistance to water is ensured by the watertight case. Pay a higher attention if the case is safely closed. No claims
will be applied to the possible oxidation, caused by entering the moisture to the camera for the reasons of improper closing of
the watertight case.
Closing/opening of the waterproof case
1.
Insert the camera to the case with the lens forward so that the display faces the color keys and a fixing mechanism on
the case.
2.
Close the back cover of the phone.
3.
Fasten the back cover of case by means of the colored fastening mechanism and snap it on the lens side
4.
This gives you a secure hold of the back cover and the closure of case against moisture
5.
Reopen the case by pulling a lock on the fastening mechanism and loosen the back case cover.
Inserting and ejecting the memory card
HINT: When inserting or ejecting the memory card, the device shuts off automatically. We
therefore recommend having the camera off before this act.
1.
Insert carefully the memory card into the memory card slot. Pay attention to the correct direction of card insertion as
shown on outline next to slot. Push gently the card into, until it firmly sticks in the device slot.
2.
To remove the card, push it gently and once the mechanism holding the card in the slot is clicking, you can move it
out of the device.
3.
If no card is inserted, the display will automatically warn of memory lack by the flashing icon of memory card on the
display.
Warning:
1.
Pay attention to the direction, in which the card is inserted into the slot. By connecting the card in the wrong direction,
the card can also damage the card slot.
2.
When the card is properly connected, the camera will set the card to use.
3.
You should always back up the documents and data, stored in the card. We cannot bear any responsibility for an
eventual loss of data.
4.
Format the memory card before first use.
Product description
1.
Button Power / Mode
2.
Button REC / WiFi
3.
OLED display
4.
HDMI conector
5.
Memory card slot
6.
Lens
7.
Status LED
8.
Speaker
9.
Charging LED
10.
Battery
11.
AV conector
12.
MicroUSB konektor
