EN
34
2. Insert two nano SIM cards or one nano SIM card
and one microSD card (shown as a TF Card on the
diagram) according to the viewport and according
to the diagram.
3. Insert the drawer gently back into the phone - the
inscription on the outside of the drawer is pointed
as the Waterproof text on the side of the phone and
the SIM / micro SD pointing toward the phone
display. The drawer must be properly pushed to the
body of the phone
– cannot leave any hole.
Charging the battery:
Before putting your phone into service you must
recharge its battery for 100%.
1. Connect the adapter to the charger. USB-C can
be rotated from both sides. Yet when attaching the
connector, do not use violence.
2. Connect the charger to the wall outlet.
3. If the battery is fully charged, disconnect the
phone from the charger.
Switching the phone on / off / sleep mode
Make sure that the phone has a SIM card and the
battery is fully charged.
Press the ON button to switch on the phone.
Switch off the phone by pressing ON and select
OFF. Confirm it by pressing OK.
Press shortly ON button to switch the phone over to
the sleep mode.
Safety Precautions:
Do not use your phone while driving
Do not use your phone at the petrol stations.
