Get the App
Network Connection
Step 1
For the best experience, download the Homeguardcare app for your smartphone by scanning the QR code below or searching for
“
Homeguardcare
” in the app store.
Connect the AC adapter to
your camera and plug it in.
Connect the camera to your router
via WiFi Configuration Guide.
6
7
Make sure you are within range of the
same Wi-Fi network you'll use for your
camera.
LED status
LED indicator shows operational status with colors. Refer to table below for detailed meaning of the LED indicator.
LED Indicator
Blinking quickly
Blinking slowly
Keep blue (Network status)
Keep red (Working status)
The indicator is off
WiFi connection failed
Device not operational
Network status indicator Blue colour
WiFi configuration successful
Beginning upgrade
Working status indicator Red colour
Connecting to WiFi by One Key
Configuration on App
1. WPS configuration: searching for available WPS device
2. WiFi mode: connecting to WiFi signal
The device works normally
but no Internet connection
Internet connected
