en
11
User manual Monika 2, Rota
www.igloo.pl
Fig.1 Construction of the device
12
Fig.2 Removing the wooden platform
13
Fig.3 Assembly of display shelves
14
Fig.4 Assembly of glass elements and aluminium lamp
14
Fig.5 Assembly/ disassembly of night screens
15
Fig.6 Condensate container
15
Fig.7 Control panel
15
Fig.8 Front glass disassembly
16
Fig.9 Temperature sensor inside the device
16
Fig.10 Cleaning the condenser
17
Fig.11 Changing the
fl
uorescent lamp
17
Fig.12 Data plate
18
Fig.13 „Igloo” thermostat control panel
19
Fig.14 „Carel” thermostat control panel
20
1. UNLOADING
The device should be transported in vertical position, and it should be properly secured and packed. The manufacturer
ships the device on a special wooden platform, secured with cardboard angle sections and foil.
2. PROPERTIES OF THE DEVICE
2.1. Purpose
“Monika 2, Rota” is a universal cooling device used to store and display a wide assortment of grocery products in singular
packages, previously cooled to storage temperature. Our display cabinets ensure universal and ef
fi
cient display area for
all types of commercial and gastronomic units. Guaranteed temperature inside the display cabinet 2ºC/+8ºC with
ambient temperature of +15ºC/+25ºC and relative air humidity of up to 60%.
2.2. Description of the device
“Monika 2, Rota” display cabinet has static cooling. All types are equipped with automatic defrosting and electronic ther-
mostat optionally cooperating with temperature recording module enabling to record and signal too low and too high
temperature within the device. There is also an option with automatic condensate evaporation. “Monika 2, Rota” display
cabinet is furnished with a storage chamber. Our devices are made according to modern technologies and have all cer-
ti
fi
cates required by law.
This sign signi
fi
es information of particular meaning for user security and for proper device
exploitation.
Contents
List of Figures
List of tables
Table 1 Technical data
12
User manual
MONIKA 2, ROTA
1. UNLOADING
11
2. PROPERTIES OF THE DEVICE
11
2.1. Purpose
11
2.2. Description of the device
11
2.3. Technical data
12
3. PREPARING THE DEVICE FOR EXPLOITATION
13
3.1. Requirements concerning the place of installation
13
3.2. Connection and actuation
13
4. EXPLOITATION
15
4.1. Temperature regulation
16
5. MAINTENANCE
16
5.1. Cleaning and maintenance
16
6. SERVICE
17
6.1. Fault identi
fi
cation and repair
17
6.2. Service
18
7. THERMOSTAT SERVICE
19
7.1. „IGLOO” thermostat
19
7.2. „CAREL” thermostat
20
en
