en
16
COOLING CABINETS, MEDIUM-FREEZING AND FREEZING CABINETS WITH UPPER AGGREGATE (“AG” TYPE)
www.igloo.pl
Keep the condenser clean. Dirt may hinder the heat
exchange, causing mainly increase in electric energy
consumption and may cause damage of aggregate
compressor. In “AG” cabinets it is recommended to cle-
an the condenser at least once a year. Clean condenser
lamellas with help of soft brush or paintbrush. If the con-
denser is extremely dirty (blocked lamellas) it is indica-
ted to use vacuum cleaner or compressed nitrogen to
suck / blow the dirt from between lamellas.
The producer shall not be held responsible for damages of the condenser aggregate resulting from non-
observance of condenser cleanliness!
When using the unit as well as during maintenance work, be careful not to damage the temperature sensor
Fig.6 (p.16) !
Door seal should be cleaned only with clean water, without addition of washing agents, and it sho-
uld be thoroughly dried.
The seal cannot come in contact with greasy substances or oils!
During maintenance services it is necessary to check whether doors close in a proper manner.
Test: place a sheet of paper between the seal and the casing and close the door. The paper
should pose felt resistance during an attempt of pulling it out.
1 – Perforated frame strip
2 – Temperature sensor
Fig. 6 Temperature sensor within the display cabinet
Fig. 8 Exchange of the
fl
uorescent lamp
1 – Starter of the
fl
uorescent lamp
2 – Base pro
fi
le
3 – Casings of the
fl
uorescent lamp and the starter
4 – Fluorescent lamp
5 – Transparent casing of the
fl
uorescent lamp
Fig. 7 Cleaning the condenser
2
1
5
2
2
3
4
5
4
1
Summary of Contents for OLA 1400.2 AG
Page 35: ...ru 35 AG www igloo pl 2 1 2 4 1 Igloo Carel 7 39 40 5 5 1...
Page 36: ...ru 36 AG www igloo pl AG 6 36 1 2 6 8 1 2 3 4 5 7 2 1 5 2 2 3 4 5 4 1...
Page 39: ...ru 39 AG www igloo pl 7 7 1 IGLOO 10 Igloo 3 3 2 www igloo pl 1 2 3 4 5 6 1 2 3 4 6 5...
Page 40: ...ru 40 AG www igloo pl 7 2 CAREL 11 Carel 1 2 4 4 5 1 5 1 www alfaco pl IGLOO 1 2 3 4 5...