en
13
User manual Samos, Samos Deep
www.igloo.pl
3. PREPARING THE DEVICE FOR EXPLOITATION
3.1. Requirements concerning the place of installation
• Verify whether the cross section of feeding conduits is proper for power consumption of the installed device.
• It is forbidden to connect the device by extension rods or dividers.
• The device should be connected to the separate, properly made electric circuit with plug-in socket with protecting pin
(according to PBUE /Regulations concerning Electric Equipment Construction/)
The device may be actuated solely after confirmation of the fire protection efficiency with results of meas
-
ures performed according to binding regulations!
3.2. Connection and actuation
• Unpack the device and remove the wooden platform from the basis (does not concern moving devices) Fig.2 (p.14
• Place the display cabinet on an even basis, which is hard enough, and then level it with feet.
• Remove the protection foil from the elements of the device
• If the user shall obtain a device partially disassembled to secure it during transportation, perform the following op
-
erations:
1. Mount display shelves
2. Mount glass sides.
3. Put the shelves on the bars fig
4. Install front glass
5. Mount night screens.
6. Place the drip tray on the base of the device, under the siphon, according to fig. 4/3 (p. 14) or fig. 5/3 (p. 14)
• The first cleaning of the device should be provide right after unpacking, and before turning it on. The unit should
be cleaned with water at a temperature not exceeding 40°C with a neutral detergent. For washing and cleaning
the equipment it is prohibited to use products containing chlorine and sodium varieties, which destroy the protec
-
tive layer and components of the device! Any residue of adhesives or silicone on metal elements should be re
-
moved only with extraction naphtha (not applicable to items made of plastic !). Do not use other organic solvents.
SAMOS DEEP 1.25
230/50
1,8
17,0
5,7
-
SAMOS DEEP 1.56
230/50
1,8
22,4
5,8
-
SAMOS DEEP 1.88
230/50
2,6
28,8
8,5
-
SAMOS DEEP 2.50
230/50
3,0
34,0
9,5
-
SAMOS DEEP 3.13
230/50
4,9
48,4
12,3
-
SAMOS DEEP 3.75
230/50
4,9
51
15,9
-
SAMOS DEEP NW90
230/50
1,1
8,5
4,4
-
SAMOS DEEP NZ90
230/50
1,4
7,2
4,4
-
SAMOS DEEP 0.94-mod/C
230/50
0,1
14,4
0,3
400
SAMOS DEEP 1.25-mod/C
230/50
0,1
17,0
0,3
400
SAMOS DEEP 1.56-mod/C
230/50
0,1
22,4
0,4
400
SAMOS DEEP 1.88-mod/C
230/50
0,2
28,8
0,6
400
SAMOS DEEP 2.50-mod/C
230/50
0,2
34,0
0,7
400
SAMOS DEEP 3.13-mod/C
230/50
0,2
48,4
0,7
400
SAMOS DEEP 3.75-mod/C
230/50
0,3
51
1,0
400
SAMOS DEEP NW90-mod/C
230/50
0,1
8,5
0,2
400
SAMOS DEEP NZ90-mod/C
230/50
0,1
7,2
0,2
400
