11
Insert bolt and front assembly into door edge
The ‘+ ‘ hole on the backset should be in the middle of the hole.
Screw Holder
Screws
15mm (0.59”)
Measure and cut the tailpiece if necessary
After inserting the tailpiece, measure the distance of protrusion from the door.
c
c
Please ensure that tailpiece is in vertical position.
Door thickness (mm)
No. of notch to cut
60
0
55
1
45
2
40
3
35
4
Notch
The recommended tailpiece protrusion
from the door is 15mm (0.6”).